Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
30
When the correct PUK Code has been entered, the PIN Code
will be reset to “0000”. This means that the PIN Code security
will be inactivated.
PUK Code
The PUK Code is a ten digit code where each digit is set
between 0-9 e.g. “0123456789”. The PUK Code can not be
changed by the user.
The PUK Code is set at the factory. A document with the PUK
Code is supplied to the user when the instrument is delivered.
Please save this document in a safe place.
C
-Enter PIN-
Done
Next
Change
-Enter PIN-
1234
Failed
Failed >10 times
- Enter PUK -
0000000000
Done
C