Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
28
Unlock Instrument With PIN Code
When the security PIN Code has been activated, the PIN Code
needs to be entered at start up.
To unlock the instrument select Unlock Instrument and press
C
Note - If no selection is made within 10 seconds the
instrument will go to suspend mode. To return to the select
mode menu press the trigger key.
The PIN code is a four digit number. The underlined digit is
selected for change.
1. Press A to change the digit to the correct number.
2. Press b to select the next digit.
3. When all four digits have been set to the correct PIN code
press C.
-Select Mode-
Setup/Level
Done
Next
C
10
Channel 8
Network ID 10
>>Unlock Instrument
Change
-Enter PIN-
0000
Time-out
in 10 sec.
Instrument locked
connection...
Waiting for
FOCUS 50 1”