Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
26
PIN Code
The PIN Code is a four digit code where each digit can be set
between 0-9 e.g. “1234”. The PIN Code can be activated and
changed by the user.
As default the PIN Code is set to “0000”. With this code set the
security is not activated and the user will not be prompted to
enter PIN Code at start up.
Note - If the wrong code is entered more than 10 times, the
instrument will be locked and the PUK Code needs to be
entered.
Activate or Change PIN Code
To activate the security PIN Code or change the PIN Code:
1. Press A to scroll to Security and then press C.
2. Press A to scroll to Change PIN and then press C.
3. Enter the current PIN Code. The underlined digit is selected
for change.
4. Press A to change the digit to the correct number.
5. Press b to select the next digit.
6. When all four digits have been set to the correct PIN code
press C.
7. Enter the new PIN Code of your choice and press C,
follow the instructions 3a, 3b and 3c
8. To confirm the PIN Code press C.