Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
25
The instrument Setup menu is structured as follows:
• Exit (to level)
• Security settings. See Security on page 25.
• Radio settings. See page 31.
• Bluetooth
®
wireless technology settings. See Bluetooth
Device Settings on page 35.
• Reference Horizontal Angle. See page 37.
• Adjustments. See page 37.
– Back
– Compensator calibration. See page 38.
– HA/VA and trunnion axis collimation. See page 40.
– Tracker collimation. See page 46.
– Laser pointer on/off. See page 47.
– Autofocus calibration. See page 49.
• Firmware version and instrument configuration
information. See page 50.
• Service info. See Service Info on page 51.
• Language settings. See Select Language on page 51.
Security
To avoid unauthorized use of the instrument a PIN/PUK
security code can be activated by the user.
- Setup -
>>
Radio settings
Reference HA
Bluetooth settings
Exit (to level)
Security