Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
24
To accept and enter the setup menu press C.
Note - Due to the high speed servo it is important to use a
high quality tripod and tribrach.
Note - If the instrument is inactive for longer than 300
seconds (5 minutes) it will go to suspend mode. See Power
Management on page 73
Instrument Setup With the face 2 display, you can access a number of
instrument functions and routines without a Spectra
Geospatial data collector connected:
In the leveling display select Setup by pressing C, the Setup
Menu appears:
Note - It is possible to access the instrument setup menu
without leveling the instrument.
X:0.0054
Y:0.0145
C
- Setup -
>>
1:250
Setup
Exit
1:250
Setup
Exit
Radio settings
Reference HA
Bluetooth settings
Exit (to level)
Security
Long
press
A