Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
23
Once you start the instrument, the Select Mode menu appears
in the face 2 display.
To go to Setup/Level press C.
Note - If no selection is made within 10 seconds the
instrument will go to suspend mode. To return to the select
mode menu press the trigger key.
Leveling Once you have selected Setup/Level, the face 2 display
appears with the electronic bubble for leveling. If there is a
Spectra Geospatial data collector connected, the Spectra
Geospatial data collector software controls the face 2 display.
To toggle between a graphical or numerical display make a
long press on A.
To change the graphical displays sensitivity (zoom) make a
short press on a.
-Select Mode-
1:250
Setup
Exit
C
Time-out
in 10 sec.
10
- setup -
>>
C
Channel 8
Network ID 10
>>Setup/Level
Radio settings
Reference HA
Bluetooth settings
Exit (to level)
Security
connection...
Waiting for
FOCUS 50 1”