Product Manual
Table Of Contents
- Safety Information
- Introduction
- Getting Started
- Set up
- Setup
- Starting the Instrument
- Leveling
- Instrument Setup
- The Laser Pointer
- Measuring the Instrument Height
- Adjusting the Optical Plummet
- Pre Measurement Check List
- Connecting a Data Collector
- Instrument Technology
- Care & Maintenance
- Appendix
11
Getting Started
Battery Safety For battery safety and environmental information, please refer
to the Spectra Geospatial FOCUS 50 regulatory information
document delivered with the product.
Battery The instrument battery is a rechargeable Lithium-ion battery.
The battery has an integrated power gauge that will display the
condition of the battery. The power gauge is activated by
pressing the button on the battery.
When you press the button, four LEDs on the instrument
battery show the power level. Each LED corresponds to a
power level of 25% so that when the power level is at 100%, all
four LEDs are lit. If the battery is completely discharged, all
LEDs are unlit.
When the button is pushed and all the LEDs flash, the battery
needs to be reconditioned in the battery charger.
When the battery capacity is between 0 and 10% one LED is
flashing. A battery with a flashing LED might not be able to
start an instrument. If started, with a battery with a flashing
LED, the operating time will be between 5 and 15 minutes.
Charging the
Battery
The battery is supplied partially charged. Charge the battery
completely before using it for the first time.
Power gauge
Button