Product Manual

English

Using the Anti-

Theft Protection in

Survey Pro

• Power on the SP80. Wait until the boot sequence is over.

• On the data collector, launch Survey Pro and open a job.

• Select Switch to GNSS to select the GNSS survey mode.

• Connect Survey Pro to your SP80 via Bluetooth.

• Create the suitable receiver profile for your SP80.

• Go back to Manage Instruments and select the receiver

profile you have just created.

• Tap on .

• Select the Alerts tab. This tab contains all the information

you need to set the anti-theft protection. It is detailed

below.

Alerts Tab

– [1] List of contacts (email addresses, phone numbers)

notified of alerts, including theft, when these occur. See

Managing Contacts and Notifications on page 42

– [2] Alerts: Select which alerts will be notified to the

registered contacts.

Alert Field Setting Notifications

Off None

Standard Only for level-1 alerts

Full For level-1 and level-2 alerts

[1]

[2] [3]

[8]

[7]

[4]

[5]

[6]