Product Manual

19
Measuring Features
1. When everything is set up correctly (see Station Setup on
page 11), tap Measure Features from the Layout menu. You
may choose to measure either points or a line.
2. Enter a description (if desired) for the line or point being
measured. Tap Shoot.
3. Repeat as necessary until all points have been measured.
Importing/Exporting Data
Tap Data Center on the main menu. From the submenu, you
can:
• Import DXF jobs or points. Points will automatically be
imported to a new job, not to the currently open job.
• Export jobs to DXF format, or points to customizable text
format.
• Export layout data
• Export deviation data
• Generate Out-of-Tolerance reports.