Product Manual

5 Using the GNSS receiver
Using an external GNSS antenna
The MobileMapper 60 handheld provides an external GNSS antenna port on the back of the device, and a
GPS external antenna is available as an accessory to be used with the receiver.
CAUTION – The use of an external GNSS antenna should be occasional only. The connector used
to connect the antenna is not compatible with intensive , daily usage.
CAUTION – The presence of any dust or moisture in the external antenna port may cause the
external antenna to not work. To prevent dust or moisture entering the external antenna slot, take
care when using the handheld with an external antenna in wet or dusty conditions.
To use an external antenna, you must configure antenna settings in the GNSS field software, once you
have connected the external antenna to the handheld. Refer to the relevant software documentation for
details.
Using an external GNSS receiver
Using the MobileMapper 60 handheld and the Survey Mobile application, you can control SP60 and SP80
survey receivers. The Survey Mobile application supports all basic survey workflows and gives access to
the main configuration parameters of the survey receivers. With a modern look and feel this application
is very easy to use and provides all that a surveyor may require.
Spectra Geospatial MobileMapper 60 Handheld User Guide | 45