Product Manual
1 Getting started
To insert a SIM card and an SDcard:
1. Turn off the handheld. See Turning the handheld on and off , page 19.
2. In a dust-free indoor environment, remove the battery cover on the back of the device—push the
two top slides down, and push the four side locks down to the unlocked position.
3. Remove the battery; push the battery lock left to the unlocked position, then lift the battery out
left-side first.
4. Insert one or two SIM cards into the SIMcard slots; make sure you insert the card correctly as
illustrated, taking note of the direction of the notched corner.
5. Insert a MicroSD memory card, metal contacts down, in the slot above the SIM card slots.
6. Replace the battery and push the battery lock right to the locked position.
7. Replace the battery cover and lock it into place.
To remove a SIMcard or an SDcard:
1. Turn off the handheld. See Turning the handheld on and off , page 19.
2. In a dust-free indoor environment, remove the battery cover on the back of the device and remove
the battery to access the card slots.
3. Remove the required SIMor SDcard(s).
4. Replace the battery and push the battery lock right to the locked position. Replace the battery
cover and lock it into place.
Spectra Geospatial MobileMapper 60 Handheld User Guide | 21