Product Manual

1 Getting started
Accessories
The following standard accessories ship with the MobileMapper 60 handheld:
l Handstrap kit
l Lanyard
l Screen protector
l AC charger
l USBcable
The following optional accessories are available to purchase:
l External magnetic GNSS antenna
l Pole bracket
l Replacement batteries
Powering the handheld
The MobileMapper 60 handheld contains a rechargeable Lithium-ion battery.
Charge the battery completely before using the handheld for the first time.
NOTE – Cold temperatures, or using Bluetooth wireless technology, Wi-Fi, or the cellular modem
consume additional battery power and so shortens battery life between charges.
Charging the battery
CAUTION – Safe temperature ranges are:
l Operating temperature range: -20 °C to +55 °C (-4 °F to +131 °F).
l Storage temperature range:-40 °C to +70 °C (-40 °F to +158 °F).
The device's USB cable has a specific connector which fits with the device's USBtype C connector. Most
standard USB cables will not connect properly to the device. Make sure you use the one provided with the
device.
1. Connect the USBtype Cend of the USBpower cable to the USBtype Cpower socket on the
handheld.
2. Connect the USBend of the power cable to the AC adaptor.
3. Connect the adaptor to main power. An international adaptor kit is provided with the handheld.
Fully charging the standard 8000 mAh battery from empty takes approximately four hours when
connected to main power.
It is recommended to charge from main power for the most efficient charging.
Avoid keeping the battery at full charge at high temperatures.
Spectra Geospatial MobileMapper 60 Handheld User Guide | 18