Product Manual

English

The following screen appears after touching ADD:

If you have purchased your SP20 with sub-meter,

decimeter or centimeter accuracy, you should have

received the corresponding POPN via email.

Enter the POPN and touch INSTALL.

• Install service or other option: Same as Install accuracy option.

This function needs a passcode, which is used to activate

the Trimble RTX service for which you have purchased a

subscription.

• About: Returns the software version of the installed

GNSSLoader application, the SP20 unit serial number

and the version of the GNSS firmware currently installed

in your SP20. Touch OK to return to the main menu.

NOTE: GNSSLoader cannot be started while SPace is

running. If you try to do so, a message will appear informing

you that this is not possible.