Product Manual
English
22
• Momentarily disable the Automatic date & time parameter
and then enter successively the current date and time in
the fields located underneath.
• Then re-enable the Automatic date & time parameter.
• Touch repeatedly to return to the Android
welcome screen.
Adjusting Time to
Screen Sleep
Mode
When using your SP20 in the field, there may be long periods
of time during which your SP20 is collecting data but there
is no need for you to touch the screen during this time (for
example you are collecting a long line or polygon feature with
MobileMapper Field). In this case you may want to keep the
screen awake throughout the logging sequence.
The default time for the screen to switch to sleep mode being
only 1 minute of inactivity, you will probably want to change
this time. Here is how you can do this:
• From the Android welcome screen, touch then .
• Scroll down to the Device section and once visible, touch
the line containing this icon: .
• Touch the fourth field (Sleep) and then choose the
duration of inactivity at the end of which the screen will
turn blank. The longest time you may choose is 30
minutes of inactivity.
• Touch repeatedly to return to the Android
welcome screen.
NOTE: The fact that the screen switches to sleep mode has
no impact whatsoever on any data collection sequence taking
place in the SP20.
Assigning
Applications to the
Programmable
Buttons
(See programmable buttons A and B on page 3.)
• From the Android welcome screen, touch then .
• Scroll down to the Personal section and once visible, touch
the line containing this icon: (AB Key Set).
• Touch button A or B at the top of the screen then tick one
of the apps listed below that you want to assign to the
corresponding key (e.g. Calculator). Repeat this action for
the other key if you wish (e.g. E-compass).
• Touch repeatedly to return to the Android
welcome screen.