Product Manual
English
20
On a Pole With
External GNSS
Antenna
In cases where you wish to use an external GNSS antenna
mounted on top of a pole, the SP20 will be inserted into a
bracket (optional accessory) which you will fasten to the pole,
approximately at mid-height.
You can freely orientate the SP20 on its bracket since it is the
external GNSS antenna, and not the SP20’s own antenna,
that is used in this case.
Insert the SP20 into the bracket so that it is pinched where
you would normally hold it in your hand. That way you keep
the rear camera clear and preserve access to the Power
button.
You may use one of the two notches in the bracket to attach
the coaxial cable connecting the SP20 to the external GNSS
antenna (see above picture), thus protecting the coaxial
connector on SP20 side from been accidentally pulled out.
To remove the SP20 from the bracket, hold the external jaw
of the bracket firmly in one hand and extract the SP20 from
the bracket using the other hand.