Product Manual
English
18
– 30/30 (sub-meter accuracy): Accuracy is 30 cm in both
horizontal and vertical.
• RTX Option: Indicates whether a Trimble RTX subscription
is valid (“CenterPoint RTX” or FieldPoint RTX” is
displayed) or not (“None” is displayed).
NOTE: RTK options may have temporary validity (1 month).
Settings
See page 13.
External GNSS Antenna
: This icon (see [7] on page 15) is shown only if an
external GNSS antenna has been connected to the SP20 (see
plug [10] on page 3).
If you touch this icon, you will be able to read the connection
status and the signal level, as received by this antenna.
SPace vs.
MobileMapper
Field
SPace is started automatically when launching
MobileMapper Field. However only the section of SPace
delivering accurate positions will be run in this case. That
means SPace will actually work as a position server for
MobileMapper Field, but its own user interface will not be
running. The consequence is that SPace will not be seen by
Android as a running application.
NOTE: The SPace position server will be closed automatically
when quitting MobileMapper Field.
If you need to view what the current GNSS reception status
is while using MobileMapper Field, you will have to open the
SPace window to access this information. You may do this by
touching the SPace icon (below left) in the Android
applications menu, or by touching this icon (see below right)
in the Android notification bar:
SPace vs. GNSS
Loader
To start GNSSLoader
(1)
(see page 24), which will be
successful only if SPace is NOT running, you will also have to
open the SPace window as indicated previously in order to be
able to quit SPace and then launch GNSSLoader.
1.Or any other application having direct control over the SP20 high-accuracy GNSS module.