Product Manual

English
17
In the same line:
Age: Age of the corrections received, in seconds.
Station ID: Identification number of the station, or PRN
of satellite in SBAS, or RTX satellite ID, providing the
corrections used.
Status: Network connection status (Connected or
Disconnected) (Blank if SBAS).
Receiver Profile Status
: Touch this icon (see [5] on page 15) to read information
about the SP20:
Receiver Type: “SP20”.
GNSS Connection Status: “Connected” necessarily. At
power up, as long as this connection is not active, you
cannot open this window. The receiver icon then looks like
this:
NOTE: After launching SPace, it takes about 4 seconds
before this connection is active.
RTX Subscription: Provides the current status of your
subscription to an RTX service (available at a later date):
Valid until <date>: You are currently allowed to use an
RTX service. The subscription will expire at the
specified date.
Expired: Subscription expired. You need to renew your
subscription if you wish to resume using this RTX
service.
Invalid: Your receiver has never been allowed to decode
RTX corrections. If you want your receiver to do so, you
need to subscribe to an RTX service (available at a later
date).
MSL version: Software version of SP20 Micro Service
Layer. (This piece of software is used to interface SP20
with Android).
RTK Option: Indicates the level of precision available from
your SP20:
Full RTK (centimeter accuracy): Centimeter-accurate
3D position
7/2 (decimeter accuracy): Accuracy is 7 cm in
horizontal and 2 cm in vertical