Product Manual

27
• : When a function is displayed, use the vertical (up
and down) arrow keys to scroll through the possible
options, if any.
Where Settings is displayed and after selecting it, use the
vertical arrow keys to make a selection within a choice of
possible parameters.
Vertical arrows are also used when you are requested to
enter numerical values, such as repeater delay or static IP
address. In this case, use vertical arrows to set a value for
each digit.
In fields that combine letters and figures (password for
example), a long press on either of these keys allows you
to switch between lower-case, upper-case and digit entry.
• : Use the OK button to enter the edit mode (for those
functions that have one) or to validate a selected
parameter.
• Where options are listed for you to choose, the currently
active option is marked with a right arrow ( ).
• The General status screen has no associated edit mode
but should error messages be reported, use the OK button
as many times as there are error messages to be
acknowledged.
• Display Settings and Advanced settings are access points to
additional parameters. After you have selected one of
them, just press one of the vertical keys to select an option
in the menu. Then press the OK button to enter the edit
mode for this parameter.
• : Use the Escape button to go up to the “parent”
screen, when applicable. A long press on the Escape
button will take you back from anywhere to the General
Status screen (except if you are editing a value).
NOTICE: The screenshots illustrating this section are just examples. Your
receiver may show different information depending on its configuration.
General Status See examples below for a rover (left) and a base (right). Refer
to the tables below for more details on each of the icons or
data reported on this screen.
OK
[1] [2] [3] [4]
[5] [6]
[1] [2] [3] [4]
[12][7] [8] [10][11][9] [12][7] [8] [10][11][9]
[5] [6]
[13]