Product Manual
3 Using the WLAN and Bluetooth radios
3. Tap Bluetooth. The handheld lists the Bluetooth devices it can detect. (If the device you
want to connect to is not listed, make sure it is discoverable; refer to the doc-
umentation for the device).
4. To set up a paired connection to a device, tap it in the list of Bluetooth devices. If you
are prompted to, enter a password (you will need to obtain this from the other
device)or confirm that the security code is the same on both devices.
If the pairing is successful, the handheld connects to the device. The device shows as
connected in the list.
Unpairing a Bluetooth device
You can unpair a Bluetooth device to delete all pairing information about it. Tap next to
the device in the list of Bluetooth devices, then tap FORGET.
Accessing a corporate network
Use a Virtual Private Network (VPN)connection to access a corporate network or Intranet.
VPNs enable you to connect to the resources inside a secured local network, from outside
that network.
Before you begin, obtain the following information from your network administrator:
l username and password
l domain name
l host name or IPaddress of the VPNserver
To add a VPN:
1. In the Apps screen, tap Settings.
2. Tap More, then tap VPN. (You may be prompted to enter an 'unlock' PIN or pattern
before you can proceed.)
3. In the screen that opens, tap + at the top of the screen to add a VPN, then follow the
instructions from your network administrator to configure each component of the VPN
settings.
4. Tap Save.
The VPN is added to the list on the VPN settings screen.
To connect to a VPN:
1. In the Apps screen, tap Settings.
2. The VPNs configured in the handheld are listed on the VPN settings screen. Tap the
Spectra Precision MobileMapper 50 HandheldUser Guide | 42