Product Manual

English

• In the left-hand side of the window, browse your computer

to the folder where to copy the files (recipient folder).

• In the right-hand side of the window, highlight the file(s)

you want to copy.

• Click on the Copy button. Files are then copied, as

requested. The lower part of the screen provides reports

information on the copy operations in progress.

Deleting Files from the Receiver

• In the right-hand side of the window, double-click on the

sub-folder containing the files you want to delete from the

receiver.

(If needed, click on to go back to the parent folder and

open another sub-folder.)

• Still in the right-hand side of the window, highlight the

file(s) you want to delete.

• Click on the Delete button. Files are then deleted. The

lower part of the screen provides reports information on

the delete operations in progress.

Restoring Factory

Settings

This can be done starting from a powered-off receiver. Just

hold down the Power button for about 10 seconds. This

causes a reset procedure to be started. At the end of this

procedure, all factory settings are restored, except the

following, which are kept unchanged:

• Bluetooth

– PIN code

– Receiver’s Bluetooth name

• Anti-Theft & startup protections

– Current states (enabled or disabled)

– Password

– Anti-Theft position

– Last position computed

Restoring factory settings is not allowed if one of these cases:

• Anti-theft protection is active

• Startup protection is active

• A validity period is active (whether still in progress or

over). (Validity periods are designed to let users work with

the receiver in a predefined configuration and for a limited

period of time.)