Product Manual

English
45
• Delete button: Deletes the files currently selected in pane
[2] or [3].
[2]: Pane showing the content of the currently open folder on
computer side.
[3]: Pane showing the content of the currently open folder on
receiver side. The receiver’s root folder contains two or three
sub-folders:
• Internal memory: Lists all G-files recorded by the receiver
in its internal memory
• Log files: Contains log files (one per day). Each log file
lists all the actions performed by the receiver in one day.
• USB key, if one is currently connected to the receiver.
To open a folder, double-click on it. To go back to the parent
folder, click on .
[4]: Pane showing copy/delete operations in progress, and all
those completed since the connection with the receiver was
established. This pane is cleared at the beginning of each
new working session of SP File Manager.
Establishing a Connection with the Receiver
• Set up the physical connection (RS232 or USB as
explained in Connecting SP60 to your Computer on
page 41)
• Turn on the receiver.
• Launch SP File Manager on your computer. This opens the
SP File Manager window.
• For an RS232 connection, first edit the line settings
(default baud rate for receiver is 115200 Bd) then click
on the Connect button. For a USB connection, select the
right COM port (see also the Note in Getting Started With
SP Loader on page 37) and then click on the Connect
button.
As a result, the pane on the right-hand side of the window
lists the two or three folders that can be seen on the
receiver.
Copying Files to the Office Computer
• In the right-hand side of the window, double-click on the
sub-folder containing the files you want to copy to the
computer.
(If needed, click on to go back to the parent folder and
open another sub-folder.)