Product Manual

English

Getting Started

With SP File

Manager

Double-click on . The SP File Manager window which

then appears is detailed below.

[1]: SP File Manager toolbar. This toolbar consists of the

following items:

• Port and baud rate scroll-down lists: Let you choose which

serial port is used on computer side for the connection

with the receiver (baud rate only makes sense when an

RS232 serial line is used). Use 115200 Bd to

communicate with SP60.

• Connect / Refresh button: Connect allows you to activate the

connection between the computer and the receiver via the

chosen serial line.

When the connection is established, the button is

changed into Refresh, which allows you to update the

content of the two SP File Manager panes ([2] and [3]

described below)

• Disconnect button: Allows you to deactivate the connection

currently established between the computer and the

receiver.

• Copy button: Copies the file(s) selected in pane [3] to

pane [2]. In pane [2], you have to open the folder where

to copy to before clicking on the Copy button.

NOTE: Copied files have different creation dates and

times compared to those of their respective original files.

The new dates and times are those corresponding to when

the files were copied.

[2]

[1]

[3]

[4]