Product Manual

English
36
Downloading
Raw Data Files
to a USB Key
The first time you connect the USB port to a computer, the
required driver is installed automatically on the computer.
After the driver has been installed, follow the instructions
below.
• Connect the USB key to a mini-USB-to-USB adapter (see
picture). (This adapter is not provided.)
• Connect the other end of the adapter to the SP60. After
about 2 seconds, the buzzer sounds briefly, meaning the
USB key is ready for use, and the Log LED starts flashing
amber at a fast rate. If you do nothing in the next 4
seconds, the Log LED will turn off and you won’t be able
to start the download sequence.
• So while the Log LED is still flashing, press the Power
button. This causes the buzzer to sound briefly meaning
the receiver is now downloading all its G-files to the USB
key. The buzzer will emit another brief sound when the file
transfer is complete.
• Disconnect the mini-USB-to-USB adapter from the SP60.
NOTE: This procedure will not delete the downloaded files
from the receiver.
Downloading Raw
Data Files Directly
to a Computer
Use SP File Manager. See SP File Manager Software Utility
on page 41.
Files can also be downloaded to the data collector using
Survey Pro (Survey menu > File Management) or FAST Survey
(Survey menu, Log Raw GPS > File Manager button) field
software.
Post-Processing
Raw Data Files
This can be done using Spectra Precision Survey Office
(SPSO) software.