Product Manual

English

Collecting Raw Data Files

Raw Data Logging

in Standalone

Mode

You can control raw data logging sessions directly from the

SP60, without the need for a data collector. After turning on

the receiver, do the following to enable raw data logging:

• Make a brief press on . The receiver enters the

configuration mode (LEDs are all in slow blinking state).

• Make another brief press on . The data logging LED

starts blinking amber at a fast rate.

• Hold depressed for about 2-3 seconds until the

buzzer emits a sound. Data logging is then started and you

will see the data logging LED now solid amber. The

receiver has automatically escaped from the configuration

mode and is now operating in normal mode.

To stop data logging, repeat exactly the previous three steps.

See also flowchart on page 15. This will turn off the data

logging LED.

Raw Data Logging

from Field

Software

With Survey Pro:

• To start data logging, open the Survey menu and select

Start Recording. While data are being logged, the screen

shows, by default, the Post-Process tab from the GNSS

Status function.

• To end data logging, open the Survey menu and select Stop

Recording. Survey Pro will then prompt you to download

the raw data file to the data collector.

With FAST Survey:

• To start data logging, open the Survey menu, select Log

Raw GPS, then Start File. Tap on .

• To end data logging, just select Close File.