Product Manual

English

alarm, and the second one will make you a legal user of the

receiver.

Using Anti-Theft

and Startup

Protections in

Survey Pro

• Power on the SP60. Wait until the boot sequence is over.

• On the data collector, launch Survey Pro and open a job.

• Select Switch to GNSS to select the GNSS survey mode.

• Connect Survey Pro to your SP60 via Bluetooth.

• Create the suitable receiver profile for your SP60.

• Go back to Manage Instruments and select the receiver

profile you have just created.

• Tap on .

•Open the Anti-Theft tab. This tab contains all the

information you need to set the anti-theft and startup

protections:

– Change Password: Tap on this button to enter and

confirm the password that will allow the field operator

to disable the anti-theft and startup protections.

NOTE: You cannot change the password while the anti-

theft protection is active.

– Enable (anti-theft): This button allows you to enable the

anti-theft function directly from this screen (as you

would from Survey > Anti-Theft).

Before you enable anti-theft, please read the currently

active password shown in plain on the screen. This is

to make sure you will keep it in mind (you’ll need it to

disable the anti-theft protection). After anti-theft has

been enabled, the Enable button turns into a Disable

button.

– Prompt to enable Anti-Theft: When this box is enabled,

users will be prompted to turn anti-theft on when they