User's Manual

3 blue LED indicates 75 – 50% battery power remaining
2 blue LED indicates 50 – 25% battery power remaining
1 blue LED indicates 25 – 0% battery power remaining
To charge electronic devices using the T1042
a)
Via T1042 wireless charging area:
** Make sure your device has integrated wireless charging capability or is equipped with wireless charging
adapter (NOTE: some electronic devices with integrated wireless capability may require users to
manually enable wireless charging in the settings of their electronic
devices)
1.
Center your electronic device overthe wireless charging area located at the back of the T1042(see # 9
of Product Map above) & power ON the T1042. Solid blue LED indicates the T1042 is wirel
essly
cha
rging your electronic device (NOTE: the solid blue LED will be lit while wirelessly charging y
our
device &will
remain lit once your device is 100% fully charged)
2.
To stop charging and/or power off light up feature, remove your electronic device from charging do
ck
(the
T1042 will automatically power OFF when inactive for approx. 30 seconds)
b)
Via USB/micro-USB charging cable:
1.
Insert the following cable into the T1042 USB output
:
i.
To charge devices with micro-USB input port: use the micro-USB/USB cable included with the
T1042.
ii.
To charge iOS devices: use the certified charging cable accessory that came with your s
mart
phon
e/electronic devic
e.
2.
Solid blue LED will remain lit while your device is being charge
d
(NOTE:
once your device is 100% fully charged, charging will stop &the T1042 will automatically
power
OFF)