W SD L A N IO W -11 LA N b/ Ca g ww rd w.s pec tec .co m.t w WLAN-1 1b Wireless/Internet SDIO WLAN card FCC ID:S2YM 0012E60INIWLAN11B 00506 TM 1b TM TM 1b 802.1 pec www.s tec.co m.tw N-11b WLA 1b SDIO WLAN Card User’s Manual ver. 1.
Content Inside Package ................................................................................................P.1 System Requirements & Installation Description...........................................P.1 Installation Procedure .................................................................................P.2~5 Inserting the SDIO WLAN Card into a PDA .................................................P.6 Removing the SDIO WLAN Card from a PDA ............................................P.
Thank you for choosing SDIO WLAN card, it is the smallest SDIO Wireless/Internet WLAN card available on the market today. It is easy to install and use, and provides unlimited online usage and connectivity wherever you are. Inside Package TM 802.11b www.spectec.com.tw WLAN-11b WLAN-11b/g SDIO WLAN Card WLAN-11b www.spectec.com.tw FCC ID:S2YMINIWLAN11B 0012E6000506 SDW-820 SDW-821 SDW-822 SDW-823 SDW-825 Driver & User Guide CD System Requirements & Installation Description 1.
Installation Procedure < First, connect PDA to your computer with a USB wire. < Main menu window will pop-up when you insert the "Spectec SDIO Series" Installation CD by autorun:
< Choose the desired Language, then click OK. 1 2 < The Installation menu will automatically appear on the screen.
< Enter user information, then click Next.
< The driver will be installed automatically. < Click Yes to proceed with installation. Click OK to finish installation. 9 10 < Click Finish to complete the driver installation process.
Inserting the SDIO WLAN Card into a PDA < Check the direction of the card. Insert the card with the label side facing the front of the PDA until it clicks. 1 2 WLAN-11b B FCC ID:S2YMINIWLAN11B 0012E6000506 TM 802.11b www.spectec.com.tw WLAN-11b # Different PDAs may have different drives. Make sure the direction is correct to avoid damaging the PDA’s SD drive. TM 802.11b www.spectec.com.
How to check Connect Status < After install the software, start path as Start\Programs. < After inserting the card into the PDA, click Start. Click Programs on the pull-down menu, then select .(Only built-in 11b card for PCC2003) TM 802.11b www.spectec.com.tw WLAN-11b 2 < Click to open the WLAN Utility window.
In “Radio” page of WLAN Utility, you may check S/W Radio Off/on for Enable/ Disable Wi-Fi card, or you can also find a shortcut icon at the lower right hand corner of the screen. < Click , shortcut icon to switch on/off Wi-Fi radio * Note : The WLAN Utility can be only compatibility on PPC 2003(CE4.X) and few windows mobile 5.0(CE5.
How to Connect Ad-hoc 2 3 4 TM 802.11b www.spectec.com.tw WLAN-11b 1 5 PS: Channe 12 is the channel in America 6 1. In WLAN Utility, select Ad-Hoc Channel (must be channel1). 2. Click OK to exit WLAN Utility. 3. Remove the card from PDA, then re-insert the card. 4. Go to PDA system: Settings\Connections\ Network Cards. 5. Click Add New. 6. Type in the name (ex. aa). 7. Check the “This is a device-to-device (ad-hoc) connection” box. 8. Click OK. The input name (ex.
