User Guide
80 
o  SEND MAIL TEST: Examine the function with registered information. 
  USER NAME: Name the DVR 
  SYSTEM RESTART 
  SYSTEM EVENT NOTIFICATION 
Allows the user to set EVENT NOFICIATION ON or OFF 
o  HEALTH CHECK 
(Allows the user to set MAIL STATUS periodically) : DAILY or WEELY or MONTHLY 
o  HDD TEMPERATURE 
o  HDD BAD SECTOR 
o  HDD ALMOST FULL 
o  VIDEO CLIP SETUP: Setting the duration for pre and post recording. 
o  EVENTS AND NOTIFICATION 
o  HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD 
Enable Email Notification in the event a problem occurs with the VT. 
o  ALARM-IN : Enable Email Notification when the camera detects sensor 
o  MOTION DETECTION : Enable Email Notification when the camera detects motion 
o  VIDEO LOSS: Enable Email, Beep and Alarm output Notification when the camera signal is 
lost. 
o  HDD TEMPERATURE : Enable Email Beep  and  Alarm  output Notification when the HDD 
reaches the maximum temperature 
o  HDD BAD SECTOR: Enable Email Notification when the HDD has bad sectors. 
o  HDD ALMOST FULL: Enable Email Notification when the HDD is almost full. 
o  HDD FULL: Enable Email Notification when the HDD is full. 
o  HDD FAILURE: Enable Email, Beep and Alarm output Notification when the HDD fails. 










