User Guide

26
4-3. Setup – Record Mode
In the Setup menu, select the Record tab. Then, the Record menu is displayed as pictured below. Navigate
through the menu items or change the settings using the mouse or the remote control.
Figure 4.3.1. Record Setup Screen
Table 4.3.1. Menu Items in Record Setup Screen
Menu Item
Description
Site
Select a channel for applying the following settings using a mouse or a remote
control. Select the “select” button beside of channel button to change the values of all
channels.
Resolution
Select 1920x1080, 1920x540, 1280x720 and 640x360 using a mouse or a remote
control.
Frame Rate
Set the frame rate for the specified channel. The sum of the frame rate values per
channel cannot exceed the maximum frame rates for a specific recording resolution.
Quality
Select the recording quality for the selected channel. Options are;
Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)
Recording
Mode
Assign the recording mode for the selected channel. Options are: Continuous, Motion,
Sensor, Schedule, Disable and Smart Recording (c + m : continuous & motion, c + s :
continuous & sensor)