Manual

36
mouse or the remote control.
Select a channel to apply the following settings using the mouse.
NAME
Set the channel name. Press the right square button and set the channel
name and select OK.
The name can be made up to 36 characters.
COVERT
Enable/disable display of the specified video channel in live display.
COLOR TUNING
Control the brightness, contrast, hue and saturation.
MAIN OUTPUT
RESOLUTION
Select video output resolution
Support 1920 X 1080, 1280 X 720
SUB MONITOR
OUTPUT
Select Sub Monitor Video out.
CVBS or SPOT
4-6. Setup – NETWORK Mode
Select the NETWORK tab. Then, the network menu is displayed as pictured below. Navigate through the
menu items or change the settings using the mouse or the remote control.
Figure 4.6.1. NETWORK Setup Screen
Table 4.6.1. Menu Items in NETWORK Setup Screen
Item
Description
NETWORK TYPE
DHCP: DVR will automatically retrieve an IP address.
STATIC: Network information must be manually configured.
IP
Enter IP address that is assigned for the DVR
SUBNET MASK
Enter Subnet Mask that is assigned for the DVR
GATEWAY
Enter Gateway that is assigned for the DVR.