User Guide

35
4-5. Setup – DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the ESC button.
Figure 4.5.1. DISPLAY Setup Screen
Table 4.5.1. Menu Items in DISPLAY Setup Screen
Item
Description
OSD
Enable/Disable displaying CHANNEL NAME/ VIDEO LOSS/ STATUS
BAR & ICON/ Camera Type and Record Mode
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD) (50~100)
MAIN MONITOR
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQUENCE
DWELL TIME
Set the dwell time of each,
Single channel display time in sequence mode (3~60 seconds)
SITE
Select a channel to apply the name and covert settings change using the