User Guide

20
4. Setting up the DVR
The following sections detail the initial setup of the DVR.
Menu screen will close if user input is not received in 5 minutes.
4-1. Setup – Main Live Screen
To enter the setup menu, right click on the mouse and select setup from the submenu or press the setup
button on the remote control.
Figure 4.1.1. Live Screen and Quick Operation Window
When the DVR prompts the LOG-IN window, enter the PASSWORD using the virtual keyboard, or the
remote control. The factory default password is 1111. It is highly recommended to assign a new password
to protect the system. New passwords can be set up in the SECURITY setup menu.
4-2. Setup – SYSTEM Mode
In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below.
Navigate through the menu items using the mouse or the remote control and change the value of the menu.