Manual

81
fails.
7-7-3. Record
Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.
 Recording Setup
o RECORDING MODE: CONTINUOUS, SCHEDULE, MOTION
o PRE RECORD: Sets whether to perform or not pre-recording.
o POST EVENT RECORD: Sets the duration of the event recording.
o AUDIO: Sets whether to perform or not audio recording.
o SCHEDULE: Sets the schedule recording.
7-7-4. Device
Select Device to set device settings of the NS
 ALARM OUT: Set the sensor, motion, and video loss for triggering alarm relay.
HDD Error and Video Loss can be set for triggering a beeping sound
The following settings can be changed to trigger an alarm output.
o ALARM DURATION