User Manual

5.2 LAN Mode
For the LAN mode,
after logging in, the main window will show
This main window can be divided into the following sections.
 Section 1: there are six
function
and Logout.
 Section 2:
The left menu pane shows all channels that are connected in the NVR currently. For each
channel, main stream or sub stream can be chosen for viewing. R
hover the mouse over the channel and click on the pulldown arrow.
 Section 3: The Open All
button enable
main stream or sub stream
. See
 Section 4: Start Talk button.
Enable two-way audio. Click
the pulldown arrow
G711a, G711u, and PCM. See
Figure
after logging in, the main window will show
. See Figure 5-9.
This main window can be divided into the following sections.
function
tabs at the top: Live View, Playback, Setup,
Sensor
The left menu pane shows all channels that are connected in the NVR currently. For each
channel, main stream or sub stream can be chosen for viewing. R
efer to
Figure
hover the mouse over the channel and click on the pulldown arrow.
Figure 5-4
button enable
s/disables live view for all channels.
Selection can be made for
. See
Figure 5-5.
Figure 5-5
the pulldown arrow
to select the
mode. There are four options: DEFAULT
Figure
5-6.
Figure 5-6
97
Sensor
, Setup,System Info,
The left menu pane shows all channels that are connected in the NVR currently. For each
Figure
5-4. To select the stream,
Selection can be made for
mode. There are four options: DEFAULT
,