User Manual

Note

 During the backup process, click on ESC to exit the current interface. However, the system will

not terminate the backup process.

 The file name format is: Channel number+Record type+Time. In the file name, the date format is

Y+M+D+H+M+S. File extension is .dav.

4.8.2 Import/Export

This function allows you to copy the current system configuration to other units. It also supports import,

create new folder, and delete folder.

In Main menu->Setting->System->Import/Export, the configuration file backup interface is shown as below.

See Figure 4-51.

Figure 4-51

 Export: Please connect the USB backup device first and then go to the interface. Click Export and then

there will be a corresponding “Config_Time” folder. Double click the folder to view the backup

configuration files.

 Import: Use this function to import the configuration files from a USB device to the unit. You need to

select a folder first. The system will pop up a prompt if there is no configuration file under the selected

folder. After a successful import, the system will reboot to activate the new setup.