User Manual

46
4.6.4 Alarm Recording/Snapshot
4.6.4.1 Alarm Recording
Go to Setup->Event-> Alarm for the alarm setup interface. See Figure 4-39.
 Select the desired channel.
 Alarm type: Two types are supported.
 A sensor input can be connected to an IP camera to generate the event
 If an IP camera loses connection with the NVR, the NVR can generate the event. The alarm can last
until the connection resumes.
 Check the enable box to enable the function.
 Type: normally open or normally closed.
a) Click Apply to complete alarm setup.
Figure 4-39
b) To setup a schedule for alarm recording, follow the same instructions as motion recording schedule,
but choose Sensor instead of Motion.