User Manual

39
 Pre-record: This option is to set up the pre-record interval for events. The range is from 1 to 30 seconds.
 Redundancy: Not applicable for the NXL series.
 SD Backup: For supported IP camera models, the video can be recorded to an SD card in case the
network connection fails. The time range is from 0 to 43200 seconds. After the network connection
resumes, the NVR will retrieve the video from the SD card.
 Period setup: Click to bring up the interface to enter a time period manually.
Follow the steps listed below to visually draw the period.
a) Select the desired channel. See Figure 4-26.
Figure 4-26
b) Set the recording type. See Figure 4-27.
Figure 4-27
c) Click and drag. See Figure 4-28. Note: for all schedules, a maximum of 6 separate periods can be
specified for a day.
Figure 4-28