User Manual

34
Preset
As shown in Figure 4-22, click preset and use the direction arrows to set the camera to the proper position.
Click the Set button and then enter the preset number.
Click the Set button again to save current preset.
Tour Setup
As shown below, click the tour button.
Enter the tour value and preset number. Click Add Preset to add the preset value to the tour.
Tips
Repeat the above steps to add more presets to the tour. Click Del preset button to remove it from the tour.
Pattern Setup
As shown below, click Pattern and enter the pattern number.
Click Begin button to start recording the directions for the pattern. You can also use the full PTZ controls
shown in Figure 4-19 to operate zoom/focus/iris/direction.
Click the End button to finish recording the pattern.