User Manual

30
4.5.6 Display
Go to Main Menu->Setup->System->Display. See Figure 4-16.
These options do not affect recording and playback.
Figure 4-16
Now you can set corresponding information.
 Resolution: Choose the appropriate resolution for the monitor: 1280×1024 (Default), 1280×720,
1920×1080, and 1024×768. Please note the system needs to reboot to apply the new resolution.
 Picture Mode: Please select from the dropdown list
 Transparency: Higher value provides more transparency of the Setup interface.
 Time display: Enable this to display the time and date of the NVR.
 Channel display: Enable this to display the local channel names and the local IP addresses of the
cameras.
 Enhance Image: Enable this to sharpen the image on live view. This option does not affect the camera
itself.
 Original scale: For selected channels, this displays the camera resolutions in their original aspect ratio.
Resolutions in 4:3 format will have black bars on the sides when this option is enabled.
Click Apply to save the setup.