User Manual

5.7.2.10 HTTPS
The HTTPS interface is shown in
Figure
Note

HTTPS must be enabled first. Go to the Connection section to do this. The unit will reboot after
enabling HTTPS.

If the device IP address changed, the server certificate must be implemented again.

If HTTPS is being used for the first time on a PC, the root certificate must be downloaded.
5.7.2.10.1 Create Server C
ertificate
Click
and enter the necessary information
Note
Please make sure the IP or domain information is the same as
Figure
5-33.
HTTPS must be enabled first. Go to the Connection section to do this. The unit will reboot after
If the device IP address changed, the server certificate must be implemented again.
If HTTPS is being used for the first time on a PC, the root certificate must be downloaded.
Figure 5-33
ertificate
and enter the necessary information
. Click Create. See
Please make sure the IP or domain information is the same as
the
device IP or domain name.
Figure 5-34
113
HTTPS must be enabled first. Go to the Connection section to do this. The unit will reboot after
If the device IP address changed, the server certificate must be implemented again.
If HTTPS is being used for the first time on a PC, the root certificate must be downloaded.
. Click Create. See
Figure 5-34.
device IP or domain name.