User Manual

5.7.1.4 IP Camera Upgrade
IP cameras using the Speco B protocols can be upgraded through the NVR
Click Browse to select
the firmware
5.7.2 Network
5.7.2.1 TCP/IP
The TCP/IP interface is shown as in
IP cameras using the Speco B protocols can be upgraded through the NVR
. See
Figure
the firmware
file.
Select the camera to upgrade and click on Upgrade.
Figure 5-23
The TCP/IP interface is shown as in
Figure 5-24. Go to Setup->Network->TCP/IP.
Figure 5-24
108
Figure
5-23.
Select the camera to upgrade and click on Upgrade.