User Manual

Please refer to the following table
Parameter
Function
Device
search
Click
to search for all IP cameras on the network.
Add
Select a device in the list and then cl
system.
Modify
Click
corresponding
Delete
Click
channel.
Manual
Add
Figure
port, HTTP, user name, and password.
Note:

Multiple protocols are supported. Speco A is the main protocol
for Speco’s IP cameras. For cert
capabilities, the Speco B protocol can be used for more control
through the NVR. This includes changing image settings, video
loss dete
and camera firmware upgrade
Figure 5-17
for parameter information.
Function
to search for all IP cameras on the network.
Select a device in the list and then cl
ick Add to add the camera to the
system.
for any device in the Added device list to
can change the
corresponding
remote channel setup.
to
delete the remote connection of the corresponding
channel.
Figure
5-17. Add a camera manually.
Specify the IP address, RTSP
port, HTTP, user name, and password.
Multiple protocols are supported. Speco A is the main protocol
for Speco’s IP cameras. For cert
ain cameras that have additional
capabilities, the Speco B protocol can be used for more control
through the NVR. This includes changing image settings, video
loss dete
ction, tampering detection,
camera offline detection
and camera firmware upgrade
104
ick Add to add the camera to the
can change the
delete the remote connection of the corresponding
Specify the IP address, RTSP
Multiple protocols are supported. Speco A is the main protocol
ain cameras that have additional
capabilities, the Speco B protocol can be used for more control
through the NVR. This includes changing image settings, video
camera offline detection
,