User Manual

5.5 Image/Alarm-out
Select a channel and click on Image as shown in
5.5.1 Image
For supported camera,
brightness, contrast, hue and satu
Click on the
Reset button to restore system default setup.
5.6 WAN mode
In WAN mode, after you logged in, the interface is shown as below. See
Select a channel and click on Image as shown in
Figure 5-13.
brightness, contrast, hue and satu
ration can be adjusted.
Reset button to restore system default setup.
Figure 5-13
In WAN mode, after you logged in, the interface is shown as below. See
Figure 5-
14
Figure 5-14
101
14
.