User Manual

Parameter
Function
Scan

Select Scan from the dropdown list.

Click Set

Use direction buttons to move the camera to
and then click
then click
Preset

Select Preset from the dropdown list.

Move
value. Click Add
Tour

Select Tour from the dropdown list.

Enter a
to

Repeat the above procedure

Click Start to star the tour.
Pattern

Select Pattern from the dropdown list.

Enter a
recording the
pattern.
Function
Select Scan from the dropdown list.
Click Set
to set the scan left and right limits.
Use direction buttons to move the camera to
the
desired location
and then click
the left limit button. M
ove the camera again and
then click
the right limit button.
Select Preset from the dropdown list.
Move
the camera to the desired location and enter
the preset
value. Click Add
to add the preset.
Select Tour from the dropdown list.
Enter a
preset value in the column. Click Add
to add
the tour.
Repeat the above procedure
to add more presets to the tour.
Click Start to star the tour.
Select Pattern from the dropdown list.
Enter a
pattern value and then click Start button to
begin
recording the
PTZ movement pattern
. Then click Add to set
pattern.
Figure 5-12
C
lick this icon to display or
hide the PTZ control
platform.
3D Intelligent Positioning
Key
100
desired location
ove the camera again and
the preset
to add
one preset
to add more presets to the tour.
begin
. Then click Add to set
the
lick this icon to display or
hide the PTZ control
3D Intelligent Positioning