Manual

6) Place the phoenix connector into the cradle on the top of the speaker. Make sure it’s firmly connected.
7) Line up top A so that the notch on the top meets the cutout on the speaker. (Pictured below)
8) The pendant mount eye-bolt will come with a nut and locking washer (Pictured below). Tighten the nut to the top and place the
washer underneath.
9) Place the eye-bolt in the hole in the center of top A and screw all the way until you meet resistance. Tighten carefully at that point
until you can no longer tighten the bolt. (Pictured below) Your speaker is ready to hang. Be sure the chain running to the building
structure is strong enough to support the speaker and securely fastened.