INSTRUCTION   MANUAL       PBM60A  -‐  60  WATT  RMS  PUBLIC  ADDRESS   AMPLIFIER     PBM60AT  -‐  60  WATT  RMS  PUBLIC  ADDRESS   AMPLIFIER  WITH  TUNER     PBM60AU  -‐  60  WATT  RMS  PUBLIC   ADDRESS  AMPLIFIER  WITH  TUNER/CD/USB 1 For  more  information  contact  Speco  Technologies   200  New  Highway,  Amityville,
PRECAUTIONS   1. Unpacking   After  removing  the  amplifier  from  the  carton,  inspect  for  any   exterior  damage  to  the  unit.    If  damage  is  noted,  notify  the  carrier  at   once  so  that  a  claim  can  be  justified.    Save  all  packing  material.    This   is  important  when  the  claim  is  processed.   2.
IMPORTANT  SAFETY  INSTRUCTIONS   1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read  these  instructions  completely.   Keep  these  instructions  for  future  reference.   Heed  all  warnings.   Follow  all  instructions.   Do  not  use  this  apparatus  near  water.   Clean  only  with  a  dry  cloth.   Do  not  block  ventilation  openings.    Install  in  accordance  with  instructions.
Thank  You!     We  at  Speco  Technologies  thank  you  for  your  purchase  of  our  PBM60A,  PBM60AT  or  PBM60AU   amplifier.    The  PBM60A  represents  Speco  Technologies  next  generation  of  commercial  public  address   amplifiers.         We  have  taken  our  customers’  input  and  created  the  perfect  amplifier  for  almost  any  application.
SECTION  1:  FEATURES  AND  SPECIFICATIONS   • • • • • • • • • • • • •   60W  RMS/120W  Max  Power   AC  115V,  60Hz   3  XLR  Microphone  inputs  with  selectable  phantom  power  (Mic  1  has  selectable  priority)   Telephone  paging  input   Music  on  hold  output   5  zoned  speaker  outputs  (70  or  25V)   Non-‐zoned  4/8/16  Ohm  output   RCA  or  XLR  line  output   Front  Bass  and  Treble
3) 4) 5) 6) through  IR  remote  control.   b. If  a  zone  is  turned  on,  the  LED  above  the  zone  button  will  illuminate.   Volume  Level  Indicator:   a. This  display  will  indicate  the  level  of  volume  of  the  amplifier.   b. Volume  can  be  changed  either  using  the  Master  Volume  Knob  (#9)  or  by  using   the  IR  remote  control   IR  receiver:   a.
Section  2:  Controls  and  Connections   REAR  PANEL                                   12) Main  Power  Switch:     a. This  switch  will  completely  turn  the  amplifier  power  on  and  off.   13) Commercial  Speaker  Zone  Outputs:   a. This  amplifier  comes  complete  with  both  constant  voltage  and  constant   impedance  outputs.
are  on  hold,  or  for  using  the  features  of  the  phone  system  to  send  a  page  via  a  specific   output  on  the  phone  system.    Installation  instructions  vary  widely  by  manufacturer.    If   unsure,  please  contact  a  professional.   15) Music-‐on-‐hold  (MOH)  Volume  Knob:   a. This  knob  will  allow  you  to  adjust  the  volume  of  the  MOH  output.
to  daisy  chain  amplifiers.   26) Auxiliary  Inputs:   a. These  inputs  accept  right  and  left  channel  RCA  inputs.   27) Phantom  Power  Switch:   a. This  amplifier  provides  phantom  power  to  the  appropriate  microphones.     b. This  switch  will  turn  the  phantom  power  feature  on  and  off  for  each  microphone   input.   28) Microphone  Inputs:   a.
SECTION  3:  REFERENCE  INFORMATION     The  following  information  is  provided  for  reference  only.  Please  consult  a  professional  if   unsure  about  any  aspects  of  commercial  or  residential  installations.   SPEAKER  CONNECTION   The  rear  panel  of  the  amplifier  contains  5,  zoned  speaker  connections.
TELEPHONE  LINE   A  telephone  line  input  of  600  Ohms  is  provided.  For  phone  systems  with  this  feature,  a  Music   on  Hold  output  is  also  available.     WHENEVER  IN  DOUBT  ABOUT  INSTALLATION,  CONSULT  WITH  A  PROFESSIONAL  INSTALLER     OR  TECHNICIAN.
• • • • • • • • • • STOP/  EJECT:  Will  stop  playing  while  source  is  active,  or  will  eject  CD  if  pressed  when  CD  is   inserted  and  no  source  is  playing   o Press  to  stop  and  the  LCD  display  will  show  the  total  number  of  tracks.
2. Select  desired  songs  by  using  FOLDER  and  SKIP  button,  then  press  RAN  /  ENTER   button  once  to  confirm.  LCD  display  shows  “00  01”  for  the  first  song   3. SKIP  to  the  next  song,  and  press  RAN/ENTER  twice  to  program  as  the  2nd  song;   LCD  display  shows  “00  02”   4. Repeat  process  for  more  songs  (Maximum  of  10)   5.
SECTION  5:  OPTIONAL  MODULES   PBM60AT         SYSTEM  CONTROLS   • VOLUME:  Turn  to  adjust  the  volume  up  or  down  relative  to  other  inputs     RADIO  OPERATION   • Press  "  BAND”  to  select  AM  /  FM.     • TUNING              :  Press  to  search  radio  stations.  Press  once  to  increase  frequency  by  steps.
SECTION  6:  IR  REMOTE  CONTROL   There  is  an  IR  Remote  control  included  with  every  PBM-‐A  series  amplifier.           15 For  more  information  contact  Speco  Technologies   200  New  Highway,  Amityville,  NY  11701•  Toll  Free:  1-‐800-‐645-‐5516•Fax:  631-‐957-‐9142  or  631-‐957-‐3880•www.specotech.
Speco  Technologies  is  constantly  developing  and  improving  products.