Manual

6
 Wall
① Select the place to install the camera.
② Place the Drilling template on the ceiling and drill the holes.
③ Fix the plastic anchors in the holes.
④ Fix the camera by tightening tapping screws.
⑤ Adjust the camera angle and attached the Dome Cover.
 Note
Do not touch the lens while making adjustment.
Open Position: Side Cable Access:
Lock Position:
3.2 3-Axis Adjustment
① Panning 360˚
Slightly loosen Pan Bracket nut then
adjust pan of the camera and
tighten the Bracket nut.
② Tilt 75˚
Slightly loosen Tilt bolt then
adjust tilt of the camera and
tighten the bolt firmly.
③ Rotation 360˚
Slightly loosen Tilt bolt then adjust rotation of the camera and tighten the bolt firmly.
When installing the cameras using the side
cable access on the ceiling, please cut out a
side access hole portion.
Tapping screw
(Ø4 x 30) x 3
Plastic anchor
x 3
Lock
Dome Cover Ass'y
Drilling
Template
Camera Ass'y
Lock ( ) the Dome Cover by moving clock-
wise.
And open (
) the Dome Cover by
moving counter-clockwise.
Lock
Lock Unlock
Tilt 75°
Pan 360°
Rotate 360°