Flexible Intensifier® Technology Bullet IP Camera QUICK INSTALLATION GUIDE O3FDP9 Please read this guide carefully before installation and operation of the product.
Notice Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Installation and services should only be carried out by an authorized personnel according to local safety regulations. If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply and have it checked by your authorized dealer before reusing. Avoid installing the camera in extremely hot or cold places.
1. PRODUCT OVERVIEW Key Features 3.0 Mega pixel 1/2.8" SONY progressive scan CMOS image sensor for excellent image quality 2.8mm wide angle lens 3-axis design Support for corridor view (in H.264) Integrated motion detection with pre- and post-alarm image / video buffering Supports CBR (Constant Bit Rate) and VBR (Variable Bit Rate) modes Supports Tampering-Alarm Controllable frame rate Privacy Masking up to 8 areas Built-in standard PoE (802.
System Integration Physical Environment Supported Protocol Intelligent Video Alarm Trigger Firmware Upgrade Etc Memory Slot Power Source Power Consumption Net Weight Dimension(in) Operating Temperature Storage Temperature HTTP, HTTPS, DNS, RTSP, RTP, TCP, UDP, ICMP, DHCP Motion detection 12 x 12 blocks Motion Detection, Tampering Alarm Remote Upgrade via Network 1 x Factory Reset Button Save to Micro SD card with event mode and continuous mode DC 12V / 1.5A, POE (Power Over Ethernet) : 802.3af Max. 3.
2.2 Name and Function 5 4 2 3 6 NO. 1 ITEM DESCRIPTION 1 Power Connector DC12V Caution : If O3FDP9 is powered by PoE, do not plug in DC Jack with active DC power into DC power connector. 2 Network and POE Connector POE (Power over Ethernet) and LAN cable 3 SD Card Slot Up to SDXC, 32GB 4 Lens 2.8mm fixed lens 5 Illumination sensor Control IR LED by sensing light 6 IR LED Infrared Hi-power LED 3. INSTALLATION 3.
Wall Tapping screw (Ø4 x 30) x 3 Plastic anchor x3 Lock Dome Cover Ass'y Camera Ass'y ① Select the place to install the camera. ② Place the Drilling template on the ceiling and drill the holes. ③ Fix the plastic anchors in the holes. ④ Fix the camera by tightening tapping screws. ⑤ Adjust the camera angle and attached the Dome Cover. Drilling Template Note Do not touch the lens while making adjustment. Lock Lock Unlock Lock ( ) the Dome Cover by moving clockwise.
3.3 INSTALLATION EXAMPLE 3.3.1 Installation Example LAN Switch Locall Access Router Internet Remote Access E-Mail / FTP 3.3.2 Connecting to the Network Open up IP Scanner. IP Scanner can search for the device on the local network. Please note that only devices that are on the same subnet can be discovered. The device is set to DHCP mode by default. In the device list, you can view the IP address, model number, and MAC address of each device.
3.3.3 Accessing the Camera or video server’s Homepage 1) Open the browser and input network camera address in the address bar or double click the device in IP Scanner. Input your IP address here 2) Please input your user name and password when prompted. 3) Default user name is admin and password is 1234. 4) The first time you login to the camera, you will be notified that a ActiveX control is required to be installed. You need to allow the installation of ActiveX. 4.
