User Manual

4
The system will pop up the above-mentioned textbox to ask you to change the
default password. It is strongly recommended to change the default password for account
security. DO NOT LOSE OR FORGET YOUR PASSWORD. If “Do not show again” is
checked, the textbox will not appear next time.
1.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: Obtain from Speco Blue Scanner (ex 192.168.1.2).
Subnet Mask: 255.255.255.0
Gateway: This may be the IP address of your router or DHCP server (ex 192.168.1.1)
HTTP: 80
Data port: 9008
Use the above default settings when logging in the camera for the first time. Directly
connect the camera to the computer through network cable.
① Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Temperature Reading Panel with Face and Mask Recognition