User Manual

2
Temperature Reading & Face Recognition Terminal User Manual
2. Network Connection
Connect O2TML via LAN or WAN. Here only take IE browser for example. The details are
as follows:
1.1 LAN
In LAN, there are two ways to access the O2TML : 1. access through Speco Blue Scanner
2. directly access through IE browser.
1.1.1 Access through the Speco Blue Scanner
Network connection:
① Make sure the PC and O2TML are connected to the LAN and the Speco Blue Scanner is
installed in the PC from the CD or via website download.
② Double click the Speco Blue Scanner icon on the desktop to run this software as shown
below:
③ The default IP address setting is set to DHCP. Click the information of the camera listed in
the above table to show the network information on the right hand. Please note the IP
address of the O2TML (shown in red boxes). If needed, you can modify the IP address
to an available static IP address. Make sure and gateway of the camera is in the same
local network segment as the computer's address.